Slicer Discord
Modular Spice Carousel – 3D printable model from MakerWorld MakerWorld
Other House Models

Modular Spice Carousel

10 Downloads
14 Likes
1 Makes
Go to Model
This spice carousel is geared to its neighbors so that when you rotate one carousel, you rotate them all. It makes searching for the right spice quick and efficient. Each 150mm carousel holds 6 standard spice jars. Link as many together as you like. This utilizes my One Piece Lazy Susan (file included here), that requires 75 6mm dia. airsoft pellets (BBs) for bearing balls.Watch: Print SettingsPrinter:UDIOResolution: 0.2mmPost-PrintingAfter printing, run a bit of sandpaper in the ball channels to smooth out any lumps. Then just snap the airsoft pellets into the ball channel on the turntable. After snapping the ring onto the turntable, if it feels a little loose, you may want to glue it in place with a few drops of superglue. Connect the bases using the links in whatever pattern you like and then just set the turntables on top of each of the bases. Category: Kitchen & Dining
Category
Other House Models
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Why?
print-in-place design · significant post-processing
Print-in-place Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 3/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
50 mm (Small)
Post-processing
Sanding, Gluing, Hardware
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

LoboCNC also publishes on

313 additional models across 1 more platforms

Verified by matching model titles across platforms.
Frequently Asked Questions
Which 3D printer is suitable for Modular Spice Carousel?
Any FDM printer should handle Modular Spice Carousel just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does Modular Spice Carousel need supports when printing?
Nope — Modular Spice Carousel is print-in-place, so it comes off the bed ready to use. No supports, no assembly.
What file format is Modular Spice Carousel available in?
Modular Spice Carousel is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Modular Spice Carousel free to download?
Yes, Modular Spice Carousel is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

1 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection