Modular Stackable EDC Tray System

Combine and scale until you have your own ideal EDC or sorting tray!

Print the tray parts upright (4 basic models are added) so that the print lines run neatly in the longitudinal direction, or print them flat with support to provide the flat surface with a nice infill. Ensure a good bonding when printing!

Use 100% infill with the tray parts (standard they are 2mm thick). Maybe use tree-support for printing upright extreme long tray parts.

Use your own favorite print settings for the sides and intermediate plates. Use support on the build plate for the locating pins on the intermediate plates. tip: use a nice top/bottom infill so that the sides really catch the eye.

To connect the tray parts, use the intermediate plate and slide a tray halfway in from both sides. It may be necessary to use some light force during assembly. In both side plates, the recesses are half-deep anyway. If necessary use a (small) hammer and hit carefully straight into the long side.

Apply a bev