Thingiverse
Modular Stackable Spice Rack
von PrintKiwi
0
Downloads
0
Likes
0
Makes
A small Modular Stackable Spice Rack designed to hold a 47mm Spice Jar.
This is still a Work in Progress but it initially seems to have good stability, and holds the jars well.
A small chamfer on the back accounts for caulking (common with splashbacks), and there are mounting holes to allow mounting directly to a cupboard door or wall .
The sections clip together with 8x30mm dowels. I'll add in an model for a 3d printed dowels.
https://s.click.aliexpress.com/e/_c3FCHT9x
Initially I'm printing in with the following settings which uses approx. 220g of filament but will tweak this over time.
15% gyroid infill,
3 walls and
4 top/bottom layers
This is still a Work in Progress but it initially seems to have good stability, and holds the jars well.
A small chamfer on the back accounts for caulking (common with splashbacks), and there are mounting holes to allow mounting directly to a cupboard door or wall .
The sections clip together with 8x30mm dowels. I'll add in an model for a 3d printed dowels.
https://s.click.aliexpress.com/e/_c3FCHT9x
Initially I'm printing in with the following settings which uses approx. 220g of filament but will tweak this over time.
15% gyroid infill,
3 walls and
4 top/bottom layers
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!