Monitor Dragon

New and improved!I've fiddled with the design a little bit, changing the pose of the dragon so that it more easily hangs off of your monitor without any external help, as well as making the wings more solid, which should help increase rigidity as well as decrease print errors.As before, I've included files for printing in one piece or with the wings separated, as well as a wingless version. I've also included the original .blend file for those wanting to make their own modifications.The finished product has a wingspan of about 10 cm (4") and a height of 15 cm (6"), from wingtips to tail.This version should fit on a much wider variety of corners/edges, and it shouldn't require any tape or other adhesive to stay put. If it still doesn't, it can always be scaled in the slicer. Right now it's sized for my monitor, which is about 2 cm (3/4") thick.I would strongly recommend organic/tree supports when printing, as the complex shape will make it very difficult to remove grid-based supports. I would also recommend painting some additional supports onto the bottom edges of the wings if you're printing it in one piece, which is what I did.Be careful around the ankles and the tail tip when releasing your model, as those pieces are relatively fragile and tend to be right in the middle of all the supports.https://www.thingiverse.com/thing:6243831