MakerWorld
Office
Voir le modèle
Monitor Riser - Desktop Riser
462
Téléchargements
341
Likes
134
Makes
Monitor Riser - Desktop RiserThe object consists of:Wooden board2 support legs4 wood screwsSpecifications:The wooden board MUST be 20 cm wide and 1.8 cm thick. The length of the board is optional and can be customized.In my case, the board is made of laminated spruce wood, sanded with three different grits: 80, 120, and 220. It was then treated with boiled linseed oil.The legs are fully 3D printed. The assembly orientation is optional and not strictly defined, though the recommended orientation is provided in the print file.In the photo, the two heights are 130 mm and 65 mm a combination that can be used to create two equidistant shelves. Alternatively, an 80 mm height is available, which is best used alone to create a single shelf.The fixing screws are inserted from underneath.The screws MUST be wood screws, 3.5 mm in diameter and 16 mm long.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
