Monitor Riser Leg

I designed this leg to build a clean and organized desk stand using a wooden board (MDF, solid wood, etc.) in your preferred dimensions.In my setup, I used a 1370 x 200 x 20 mm wooden board. You can easily adapt the design to your own required size.The leg dimensions are:200 x 20 x 75 mmTo enhance the visual appearance, I added a circular grid pattern on the side surface. This gives the leg a modern and lightweight aesthetic instead of a plain solid block.AssemblyThe legs are mounted to the wooden board using M6 bolts (12 mm head diameter).For a strong and proper installation, you need to drill two types of holes in the wooden board:A through hole for the M6 boltA recessed pocket on the underside for embedding the M6 nutFor the nut, create a pocket on the underside of the board wide enough to fit the outer dimensions of the M6 nut and deep enough to match the nut thickness.This allows the nut to sit embedded inside the wood and remain flush with the surface.When the bolt is inserted fr