Monitor Stand Riser

Printing right now, four feet will take about 15h to print.
Just remixed to use a 15mm board cause this is what i have in hand.
- fixed the screw holes after scaling it down. the screw hole has 6.6mm that should be more then enoght to get a 6.4mm srew head in.
- the riser in scale now has about 102mm from base to top + 15mm from the wood. the foam pad space was not corrected, after scaling.

the on shape link if you need to change anything. You have to have a OnShape account and you have to copy to be able to edit.
https://cad.onshape.com/documents/06d33086185e511c52c4b1ff/w/f462147b317ed384a0aaa2fd/e/75fd79e66133c7a0bd214812?renderMode=0&uiState=648bc813f7308c381ff03f20

thanks to Martn0503 for the design.