Moose

This was one of my first attempts using Kiri Engine to scan something for an stl file. I don't know enough to fix it, but it ultimately printed pretty good, First, when you upload the file to Cura, you'll need to enlarge it to find it, then change the scale to 5000%. Yes, that's five thousand. Then you'll have to play around with it to lay it flat on the plate. But once done, you should be able to print a pretty good moose about 4 1/2" tall (I've printed them from about 3" to 6"). If anyone knows how to fix the stl file, please do. You will definitely need (tree) supports. Just be careful removing them because for some reason the right antler has issues.