Thingiverse
MPMD Base
von nrodgers1987
84
Downloads
55
Likes
0
Makes
Monoprice Mini Delta Base
Everything is shown it the position i printed it in.
Hardware List:
12 - M3 X 10mm screws and washers to secure base to printer
12 - M3 x 12mm screws, washers, and nuts to join feet to panels
2 - M3 x 16mm screws, washers and nuts for the sd extention clamp
2 -Female 5.5 x 2.5 mm dc jack
2 -Male 5.5 x 2.5 mm dc jack
3 - Silicone pads https://www.amazon.com/gp/product/B075KKX3QQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1
1 - Switch https://www.amazon.com/gp/product/B07D2CM7LR/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
1 - Micro Sd to Full SD entention cable (*Note: plastic housing must be removed for this to fit in the panel*) https://www.amazon.com/gp/product/B01D9JIUU0/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Everything is shown it the position i printed it in.
Hardware List:
12 - M3 X 10mm screws and washers to secure base to printer
12 - M3 x 12mm screws, washers, and nuts to join feet to panels
2 - M3 x 16mm screws, washers and nuts for the sd extention clamp
2 -Female 5.5 x 2.5 mm dc jack
2 -Male 5.5 x 2.5 mm dc jack
3 - Silicone pads https://www.amazon.com/gp/product/B075KKX3QQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1
1 - Switch https://www.amazon.com/gp/product/B07D2CM7LR/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
1 - Micro Sd to Full SD entention cable (*Note: plastic housing must be removed for this to fit in the panel*) https://www.amazon.com/gp/product/B01D9JIUU0/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
