MTB flash light mount

This is designed to go on the thick part of the handle bar of MTB. Specifically designed to be as centered on the handle bar as possible. Diameter of the bar should be between 30-35 mm for the thing to grab good. To assemble all you need is one M4 bolt and nut, will work with smaller or larger with some mods. I used the bolt and nut from the Harbor Freight bolts and nuts set for $5 with 260 pcs. Do not over-tighten the nut as you can crack the holder. Flash light is attached to the platform with zip ties and then can be attached or removed from the bike by simply sliding all assembly on. Make sure that you attached the flashlight platform in such orientation that positions the matching opening on the mount and platform to slide forward, not backward. This will ensure that the flash light won't be able to fell forward during braking or jumping.