Thingiverse
MTG Cube
von Westminst
141
Downloads
92
Likes
0
Makes
"The Golden Cube for the Golden Cube". This was a 3d model designed by me and my good friend to house his Cube of ~500 cards.
Link to tinkercad file for desired editing: https://www.tinkercad.com/things/d1CAqpkzaaS
The print volume for this cube is 200x200x200 mm, so you do need a printer which can contain this. Alternatively I supposed you can cut it into 8 pieces which can be glued together. Supports will be necessary due to the large overhangs from the cubbies, and I recommend anywhere between 10-20% support structure.
The cube holds 4 "long" trays and 4 "tall trays". The trays were custom designed and can each hold 100 cards, for a total of 800 cards with all 8 trays included.
The faceplates and cube have slots for magnets which are used to keep them attached. The dimensions of the holes are 9 mm diameter and 2 mm height. Any magnet which fits these dimensions will work.
Shard symbols made by reddit user /u/thespinity.
Link to tinkercad file for desired editing: https://www.tinkercad.com/things/d1CAqpkzaaS
The print volume for this cube is 200x200x200 mm, so you do need a printer which can contain this. Alternatively I supposed you can cut it into 8 pieces which can be glued together. Supports will be necessary due to the large overhangs from the cubbies, and I recommend anywhere between 10-20% support structure.
The cube holds 4 "long" trays and 4 "tall trays". The trays were custom designed and can each hold 100 cards, for a total of 800 cards with all 8 trays included.
The faceplates and cube have slots for magnets which are used to keep them attached. The dimensions of the holes are 9 mm diameter and 2 mm height. Any magnet which fits these dimensions will work.
Shard symbols made by reddit user /u/thespinity.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
