Thingiverse
MurphPad Case
by cybernate_
9
Downloads
13
Likes
0
Makes
This 3d printed case is designed for a [MurphPad](https://mechwild.com/product/murphpad/). The case angle matches my [Keychron C1](https://www.keychron.com/products/keychron-c1-wired-mechanical-keyboard).
The case bottom has 2 types of standoffs for mounting to the PCB. The front 3 take the bolts that come with the MurphPad directly. The back 4 take the standoffs that come with the MurphPad, inserted with a soldering iron.
The top and bottom attach using [M2 bolts](https://www.boltdepot.com/Product-Details.aspx?product=6845) and [M2x3x3.5mm threaded inserts](https://www.amazon.com/dp/B08Z8BM2Q5?ref_=cm_sw_r_cp_ud_dp_VG4278158TRHZ56JF11Z).
I printed the bottom in a [clear filament](https://www.amazon.com/dp/B07MBCBRS6?ref_=cm_sw_r_cp_ud_dp_FEESYSHEZ3FJYMDAV731) to allow the light to shine through.
The case bottom has 2 types of standoffs for mounting to the PCB. The front 3 take the bolts that come with the MurphPad directly. The back 4 take the standoffs that come with the MurphPad, inserted with a soldering iron.
The top and bottom attach using [M2 bolts](https://www.boltdepot.com/Product-Details.aspx?product=6845) and [M2x3x3.5mm threaded inserts](https://www.amazon.com/dp/B08Z8BM2Q5?ref_=cm_sw_r_cp_ud_dp_VG4278158TRHZ56JF11Z).
I printed the bottom in a [clear filament](https://www.amazon.com/dp/B07MBCBRS6?ref_=cm_sw_r_cp_ud_dp_FEESYSHEZ3FJYMDAV731) to allow the light to shine through.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
