My HyperCube Evolution

##THIS IS A WORK IN PROGRESS

My version of the HyperCube Evolution, based heavily on the work by Scott_3D and Tech2C. My plans are to feature dual Z axis motors on a smallish 200x200x200mm build volume using 32bit Marling controller board and a direct-drive extruder (probably the E3D Titan Aero).

I have started a new PlayList on my YouTube Channel to walk through each step of the build: https://www.youtube.com/playlist?list=PLJX30NW4d60PdxcPWZcrLxaXvndv3tkGq

And will update this Thingi page with the Printed Parts, Parts Lists, and link to each video as they are produced.

Please refer to Tech2c and Scott_3D Thingi pages for more information on the HyperCube & HyperCube Evolution 3D Printers (referenced in the Remixed From section on this page)

I welcome feedback and suggestions during this process as my goal is to produce a highly accurate, and fast (up to 80mm/s) 3D Printer (within reason :) ).

###Part 1 - Building the Frame
**YouTube Video:** https://youtu.be/bWgge