Naruto

https://www.patreon.com/cw/3D_MENTIEL Si vous aimez mon travail, venez faire un tour sur mon Patreon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 199.98x199.98mm in size You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.55997mm #000000 PLA Deeplee Black Transmission Distance: 0.2 #ce2406 PLA Forshape red Transmission Distance: 5.3 #f7e735 PLA Forshape+ Yellow Transmission Distance: 7.1 #ffffff PLA Deeplee White Transmission Distance: 4.7 This print uses 4 unique filaments Instructions de changements: Commencer par Black At layer #14 (1.2mm) swap to red At layer #22 (1.84mm) swap to Yellow At layer #25 (2.08mm) swap to White pour le reste.