Thingiverse
Nefertiti
door 3dprinterlab
85
Downloads
79
Likes
1
Makes
Nefertiti model inspired by the blog post and Youtube video from RichRep (Richard Horne) http://richrap.blogspot.nl/2016/03/3d-printing-and-finishing-nefertiti.html
I had to cut the model into 11 pieces so it fitted my 3dprinterlab.org standard Prusa i3 (200 X * 200 Y * 220 Z build space), printed with a 0.4 mm nozzle.
After printing the parts I filled them with plaster and glued them together with epoxy. Then I sanded down the joint and gave it a coat of Zinc primer and sanded down the model very lightly to preserve the 3d printer artifacts. Finally I gave the model 3 coats of golden spray paint.
https://www.facebook.com/3dprinterlab/
I had to cut the model into 11 pieces so it fitted my 3dprinterlab.org standard Prusa i3 (200 X * 200 Y * 220 Z build space), printed with a 0.4 mm nozzle.
After printing the parts I filled them with plaster and glued them together with epoxy. Then I sanded down the joint and gave it a coat of Zinc primer and sanded down the model very lightly to preserve the 3d printer artifacts. Finally I gave the model 3 coats of golden spray paint.
https://www.facebook.com/3dprinterlab/
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!