Thingiverse
NeoPixel Ring Housing
por ijmclinden
616
Descargas
513
Likes
3
Makes
#### Led Housing for a 24 Ring of NeoPixel Leds.
Designed as a sleek way to integrate NeoPixel rings into projects.
### Instructions:
* Print from PLA or PETG
* Print Body.stl in any color (~250 micron Layer Height)
* Print Diffuser.stl in clear (~100 micron Layer Height)
* Thread the leads through the hole
* Insert NeoPixel ring - Take care to place the leads around the standoffs. The body is designed to friction fit against the outside of the LED ring.
* (Optional) Add a drop of CA glue to secure the ring
* Cap with Diffuser, round side on the inside (So the smooth bed-facing side is out)
* Secure Diffuser with CA glue
* (Optional) Seal diffuser and wire hole completely for moisture-resistant housing.
### Parts:
* Body.stl - Flat-mount option, wires feed out the side
* Body_RearMount.stl - Designed as a panel-mount alternative, wires feed out the back
* Diffuser.stl - Front lens element
* Body Mounting Holes.pdf - Mounting hole dimensions for Body_RearMount.stl
Designed as a sleek way to integrate NeoPixel rings into projects.
### Instructions:
* Print from PLA or PETG
* Print Body.stl in any color (~250 micron Layer Height)
* Print Diffuser.stl in clear (~100 micron Layer Height)
* Thread the leads through the hole
* Insert NeoPixel ring - Take care to place the leads around the standoffs. The body is designed to friction fit against the outside of the LED ring.
* (Optional) Add a drop of CA glue to secure the ring
* Cap with Diffuser, round side on the inside (So the smooth bed-facing side is out)
* Secure Diffuser with CA glue
* (Optional) Seal diffuser and wire hole completely for moisture-resistant housing.
### Parts:
* Body.stl - Flat-mount option, wires feed out the side
* Body_RearMount.stl - Designed as a panel-mount alternative, wires feed out the back
* Diffuser.stl - Front lens element
* Body Mounting Holes.pdf - Mounting hole dimensions for Body_RearMount.stl
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
