Ninetails

Ninetails fox from Pokemon. Frame used in picture is from Canadian Gamer slim and square.If you like this model or any others please give me a like and follow and as always boosts are much appreciated. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.4mmFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #f4ee2a PLA bambu yellow Transmission Distance: 5.3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 1This print uses 6 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Maroon Red At layer #12 (1.04mm) swap to Pumpkin Orange A