Nitro Rustler Electric Conversion

This was a nearly complete redo of someone else's design found here https://grabcad.com/library/nitro-rustler-electric-conversion-1 I didn't know how else to credit them so there it is. This piece will completely replace the parts under the top plate and the transmission brace. Modification to the brace or the top plate are no longer necessary. I also edited the size of the battery compartment so normal size 2S batteries will actually fit and got rid of 2 of the screw holes so we don't need to pretend you can use them without destroying the battery. I made everything a bit beefier to house 3mm nuts everywhere.

All factory screws can be reused except for at the transmission brace. The bottom screw from the factory brace is longer and the perfect size to use for the top of this new framework. You will then need to replace the bottom screw with a 3mmx30mm screw. Both screws will be secured with nuts on the spur gear side of the transmission. There are bosses on the new transmission brac