nozzel clean + Gcode

nettoyage buse Gcode start machineM220 S100 ;Reset FeedrateM221 S100 ;Reset FlowrateM140 S[bed_temperature_initial_layer_single] ;Set final bed tempG28 ;HomeG92 E0 ;Reset ExtruderG1 Z2.0 F3000 ;Move Z Axis upM104 S[nozzle_temperature_initial_layer] ;Set final nozzle tempG1 X1 Y-18 Z3 F5000.0 ;Line up with brushM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilizeM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilizeG1 X87 Y-16 Z4.5 F5000.0 ;Wipe 1G1 X46 Y-16 Z4.5 F5000.0 ;Wipe 2G1 X87 Y-16 Z4.5 F5000.0 ;Wipe 3G1 X46 Y-16 Z4.5 F5000.0 ;Wipe 4G1 X87 Y-19 Z4.5 F5000.0 ;Wipe 5G1 X46 Y-19 Z4.5 F5000.0 ;Wipe 6G1 X87 Y-19 Z4.5 F5000.0 ;Wipe 7G1 X46 Y-19 Z4.5 F5000.0 ;Wipe 8G1 X87 Y-19 Z1.5 F5000.0 ;Wipe 9G1 X40 Y-18 Z15 F5000.0 ;Raise to clear brushG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start positionG1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first lineG1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a littleG1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second lineG92 E0 ;Reset ExtruderG1 E-1.0000 F1800 ;Retract a bitG1 Z2.0 F3000 ;Move Z Axis upG1 E0.0000 F1800