Oculus Touch Controller Desk Mount

Not very sexy but it gets the job done. Max desk thickness is 26mm.

Print the screw at .1mm layer height with the square side down.

For the body pritn thread side on the printing surface.
If you have simplify 3D print the first 5mm at a .1mm layer height and the rest at .3mm.

If you don't you're kind of stuck printing the whole thing at .1mm because the threads need to be printed at a fine detail. You might be able to get away with .2mm just make sure you print the screw at .2mm as well.

Don't forget supports. 10% infill