OpenAstroTracker tripod

Update of the 09/12/2022:
Addition of:
- "Test in 20x20-17", "Test out 20x20-17", "Leg_base 20x20-17" and "Foot_TI 20x20-17" for new compatibility with tubes of 20x20mm out, and 17mm in.
- "Foot_TI" to replace "Foot" and "Martyrdom". It needs M4 heat install brass inserts instead of the M4 nuts.


**************************************************************************************
Initial:
I designed this tripod for the OpenAstroTracker with the AutoPA addons.

I have tested successfully this tripod with 9kg on it.
I recommand to test it for your load with a margin first of all.

The assembly needs:
- 12 screws M5, length depending of your woodboard thickness (30mm for a woodboard of 15mm)
- 12 washers M5
- 12 nuts M5
- 3 screws M6 40mm domed head with square neck
- 3 nuts M4
- 3 screws M4x12mm
- 3 threaded rods M10, length as you want (180mm in my case)
- 3 nuts M10
- 3 square tubes in aluminium of 400mm length, sold as 20x20mm (in reality 19.41mm out an