Thingiverse
Parametric Chisel Cap
73
Descargas
43
Likes
0
Makes
This is a parametric chisel cap/protector. It is a simple but effective design. Theoretically, you should be able to use this with the thingiverse customizer.
You simply enter your chisel's dimensions, choose material thickness and cap length and print. You might also be able to use this to make caps for other similar blade (handplane etc.). However, I did not test this.
I bought a set of old chisels and needed a set of caps, so I made this. Other designs were not parametric or were unsuitable in another way. Hope this helps you.
Caution! Only use these when you know what you are doing. If your print breaks, you might injure yourself. Use at your own peril!
Designed with OpenSCAD.
Conceivably Engineering - Little competence, big smiles.
You simply enter your chisel's dimensions, choose material thickness and cap length and print. You might also be able to use this to make caps for other similar blade (handplane etc.). However, I did not test this.
I bought a set of old chisels and needed a set of caps, so I made this. Other designs were not parametric or were unsuitable in another way. Hope this helps you.
Caution! Only use these when you know what you are doing. If your print breaks, you might injure yourself. Use at your own peril!
Designed with OpenSCAD.
Conceivably Engineering - Little competence, big smiles.
ConceivablyEngineering también publica en
6 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
