Paramore Hueforge

This is a Hueforge of Paramore singing with an orange tint to make it pop, I think it looks great. Project: Paramore.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x99.94mm in sizeYou may print at higher layer heights below the Min Depth of 2.5mmThe Max Depth is 4.6mm and the Actual Depth is 4.6mmFilaments Used: PLA+ Esun Black Transmission Distance: 0.2 PLA+ Esun Dark Grey Transmission Distance: 0.8 PLA+ Esun Orange Transmission Distance: 5 PLA+ Esun Silver Transmission Distance: 1 PLA+ Esun Cold White Transmission Distance: 1.4 This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #33 (2.72mm) swap to Dark Grey At layer #38 (3.12mm) swap to Orange At layer #43 (3.52mm) swap to Silver At layer #45 (3.68mm) swap to Cold White for the rest. to print with five colours using AMS you set the white to using the black PLA and then once black is complete change the roll to white while it is continuing printing, or you