Thingiverse
Phitop
von wood73
6
Downloads
10
Likes
0
Makes
Le Phitop est un objet étrange qui se dresse quand il tourne à 10 tours / seconde
Imprimez 2 moitié et coller.
Après impression, polish avec papier de verre 1200
Ratio 2 = ø30mm / long 60mm
Ratio 1,75 = ø40mm / long 70mm
https://www.youtube.com/watch?v=ducb-d8b8w8&feature=youtu.be
The Phitop is a strange object that stands when it rotates at 10 rpm
Print 2 half and paste.
After printing, polish with sandpaper 1200
Ratio 2 = ø30mm / long 60mm
Ratio 1.75 = ø40mm / long 70mm
The Phitop is a strange object that stands when it rotates at 10 rpm
Print 2 half and paste.
After printing, polish with sandpaper 1200
Ratio 2 = ø30mm / long 60mm
Ratio 1.75 = ø40mm / long 70mm
The Phitop is a strange object that stands when it rotates at 10 rpm
Print 2 half and paste.
After printing, polish with sandpaper 1200
Ratio 2 = ø30mm / long 60mm
Ratio 1.75 = ø40mm / long 70mm
Imprimez 2 moitié et coller.
Après impression, polish avec papier de verre 1200
Ratio 2 = ø30mm / long 60mm
Ratio 1,75 = ø40mm / long 70mm
https://www.youtube.com/watch?v=ducb-d8b8w8&feature=youtu.be
The Phitop is a strange object that stands when it rotates at 10 rpm
Print 2 half and paste.
After printing, polish with sandpaper 1200
Ratio 2 = ø30mm / long 60mm
Ratio 1.75 = ø40mm / long 70mm
The Phitop is a strange object that stands when it rotates at 10 rpm
Print 2 half and paste.
After printing, polish with sandpaper 1200
Ratio 2 = ø30mm / long 60mm
Ratio 1.75 = ø40mm / long 70mm
The Phitop is a strange object that stands when it rotates at 10 rpm
Print 2 half and paste.
After printing, polish with sandpaper 1200
Ratio 2 = ø30mm / long 60mm
Ratio 1.75 = ø40mm / long 70mm
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!