PhoeniX

Project: 250x120.hfp Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 250x119.23mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.32mm and the Actual Thickness is 1.9173mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #ae272b PLA Generic red Transmission Distance: 6.4 #ff5500 PLA Generic orange Transmission Distance: 7.2 #ffff00 PLA Generic yellow Transmission Distance: 7.2 #ffffff PLA Generic White Transmission Distance: 4 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #12 (0.6mm) swap to red At layer #18 (0.84mm) swap to orange At layer #25 (1.12mm) swap to yellow At layer #33 (1.44mm) swap to White for the rest. Project: 200x95 .hfp Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x95.38mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Ma