Pi Stack

This is my interpretation of a Pi Stack. I wanted to use the existing case design by 0110-M-P (https://www.thingiverse.com/thing:922740), but I wanted to stack several Raspberry Pi computers for experimenting with cluster technology. I also wanted to add an Ethernet hub and power supply to make it truly mobile. I chose an Ethernet hub to make it easier to take the stack on the road (no monkeying with WiFi addresses, etc).

I've included all of the files needed to build a stack as tall as you want. You need only print the correct number of spacers and cut your threaded rods to length. You may also need to modify the .scad file to fit your own accessories.

Vitamins
---
The following vitamins are what is needed to make a Pi Stack of (5) Raspberry Pi computers plus the accessory bracket. Use this as a guide and adjust as necessary for your own stack height.

(4) #8 threaded rods (or equivalent) 280mm in length
(4) #8 nuts
(4) #8 knurled nuts
(8) #8 rod end covers (optional but