Pied Python Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 56.82x152.5mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #9d432c PLA BambuLab Basic Brown Transmission Distance: 2 #f99963 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Brown At layer #11 (0.96mm) swap to Mandarin Orange At layer #14 (1.2mm) swap to Yellow At layer #19 (1.6mm) swap to Ivory White for the rest.