Pikachu Clock

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x167.71mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.7PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Blue Transmission Distance: 1PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 5.3This print uses 5 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to RedAt layer #13 (1.12mm) swap to BlueAt layer #15 (1.28mm) swap to YellowAt layer #24 (2mm) swap to Jade White for the rest. N.BLa 2a foto dell'oggetto reale sono stati utilizzati i seguenti colori Esun PLA+:NeroRosso FuocoBluGialloBianco