PiNAS

# PiNAS

Find this on GitHub at https://github.com/fabriziofiorucci/PiNAS

## Description

PiNAS is a 3D printed compact NAS enclosure based on Raspberry Pi and up to two SATA HDD/SSD units connected to the Raspberry Pi via SATA to USB converter.

Software-wise it runs on Raspbian and Samba/FTP/anything you like. Power supply can be provided using a 12V 5A external PSU that will power the +12V lines of HDD/SSD drives.
+5V power supply can be provided using a small buck converter such as the DC DC Step Down MP1584 that can provide up to 3A of current, enough to power the Raspberry Pi and the two disk units.


## 3D components

All parts should be printed using:

- PLA filament
- 3 walls
- 0.1mm layer height
- 15% infill
- print plate adhesion raft if needed

Use:

- 'Raspberry Pi 2 plate.stl' for Raspberry Pi 2
- 'Raspberry Pi 4 plate.stl' for Raspberry Pi 4

## Additional hardware needed

- 120x120x25mm PC fan (ie. https://www.aliexpress.com/item/1005002404