Thingiverse
Plotter
by Giovanni1965
0
Downloads
0
Likes
0
Makes
Semplice tracciatore per stecca i nacciaio da 19 mm, la trovate nei negodi cinesi, vi serviranno tre dadi M4, due viti a brugola M4 da 16 mm e una vite a brugola M4 da 20 mm per la manopola, il montaggio è intuitivo, nella parte superiore c'è una scanalatura, io ci ho inserito un piccolo pezzo di gomma eva per non rigare la stecca in acciaio con la vite.
Simple 19 mm steel cue plotter, you can find it in Chinese shops, you will need three M4 nuts, two M4 16 mm Allen screws and one M4 20 mm Allen screw for the knob, assembly is intuitive, in the part at the top there is a groove, I have inserted a small piece of eva rubber in it to avoid scratching the steel stick with the screw.
Simple 19 mm steel cue plotter, you can find it in Chinese shops, you will need three M4 nuts, two M4 16 mm Allen screws and one M4 20 mm Allen screw for the knob, assembly is intuitive, in the part at the top there is a groove, I have inserted a small piece of eva rubber in it to avoid scratching the steel stick with the screw.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!