PomPom makers

16mm 22mm 28mm 40mm 64mm and 80mm pompom makers

Designed for my sister in law,
printed in PETG at 0.2mm height 0.4mm line width
I saved the in 3MF format, Cura will import them fine. Just 42mm is in STL as well for this site :)

I used a short piece of an RC Model pushrod but any 2mm steel rod will do to join the 2 halves together

For each left/right circular part i just mirror printed it in cura to create the opposite half
also print each top part twice one for each half.

Pressing the circular parts onto the top parts is tight, you may need to carefully file the inside lip where they join together but you dont want them falling off so I designed it this way.