Poo Collection System

Remixed design for the X1/P1 series for Poo Handling on all Bambu Core XY machine designs, original design credits to Tooling Lee. For maximum strength use PETG on the base and PLA for the drawer and hopper, but PLA can be used for all. I used CA Glue to adhere the sections together. Completely redesigned chute to allow gravity to do the work and no angles to catch on.I have 5 magnets on the chute and 1 on the base to keep the hopper tight to the back of the machine. I used 8mm but the reliefs are setup for 10mm magnets but anything 6 - 10 x 2mm thick should work. Make sure of the polarity at bottom of chute and base are positioned to attract to each other. Added guides to the base side panels to keep drawer straight and added guides to the drawer when closing. Added matching slots to the corners pieces. Added recessed numbers oriented to the assembly, Just have all the numbers face-up and upright and the pieces are in the correct location. Added lip to front panel to remove gap from d