Thingiverse
Engineering
Zum Modell
Primer Cube (large version)
1
Downloads
3
Likes
0
Makes
Watch the attached video for additional information.
This holder and cover are for a custom made low budget Primer Cube that uses a ZY6812 motor and a bowl shaped magnet array with 89 pieces of neodymium magnets.
The motor usually comes with a gear mounted on the axle which has to be removed first.
The magnet array uses 89 pieces of 10mm cube magnets which should be glued into the array.
This holder and cover are for a custom made low budget Primer Cube that uses a ZY6812 motor and a bowl shaped magnet array with 89 pieces of neodymium magnets.
The motor usually comes with a gear mounted on the axle which has to be removed first.
The magnet array uses 89 pieces of 10mm cube magnets which should be glued into the array.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
