Printbed scraper, Doublesided

Printbed Scraper — Double-Sided (Shared Handle)🧩 DescriptionA compact, double-sided printbed scraper: two working edges on one shared handle. When one edge gets nicked, flip and keep going — saving filament versus printing two tools. The handle has a chamfered bottom so the part pops off the bed easily after printing. Clean leverage, comfortable grip, and a tidy, elegant look for your bench.🖨️ Printing TipsOrientation: Flat on the bed, handle up.Supports: Not required.Adhesion: PEI (smooth or textured) with a light glue stick or other adhesion aid recommended.After print, if needed, lightly deburr the edge with fine sandpaper.🛠️ Recommended SettingsGeneric profiles work well — no exotic tweaks required.Material: Print with a strong filament for durability, PETG or ABS recommended. PLA is also possible, but it will wear faster.First layer: 0.24 mmNext layers: 0.12 mm (smoother finish, a bit more flex) – 0.20 mm (faster print, more stiffness)Bottom layers: 5Walls / perimeters: 5Top/Bottom pattern: ConcentricPerimeter generator: Arachne walls engine (if your slicer supports it)Ironing: You can enable ironing on the topmost surface for a cleaner finish🧰 Use & CareWork at a low angle with gentle pressure on PEI; avoid digging into the sheet.If you regularly fight very stubborn parts, consider PETG/ABS and keep 5 perimeters for stiffness.You can also try to print a scraper with a reinforced tip you can find in my other uploads:https://www.crealitycloud.com/model-detail/printed-scrapers-spatulas-set?source=22☕ Support & FollowIf you like my designs, follow me — more functional everyday prints are coming soon, including tool organizers, workshop helpers, and printable accessories.You can buy me a coffee simply by printing and boosting my files — nothing more 😉Most of my uploads are completely free, so I’ll be truly happy if you decide to reward my work in any way.If you’re interested in commercial use of this model, please contact me by leaving a comment.