Thingiverse
Printer speed test
door Its_3d_Willy
15
Downloads
11
Likes
0
Makes
As slicer independent of a speed test as I could design, it should be pure perimeters!
The test consists of long and short segments, sharp and smooth curves
Print with initial layer height 0.3mm. Brim is optional (Although designed for 1mm or 1 line width brim.)
Print with 1 perimeter
0% infill
No gap fill
0 thickness top.
With 1st layer excluded my record is for 0.12mm layer heights is 25 minutes at 300mm/s peak, 4k accel, how quick can you complete it!
The test consists of long and short segments, sharp and smooth curves
Print with initial layer height 0.3mm. Brim is optional (Although designed for 1mm or 1 line width brim.)
Print with 1 perimeter
0% infill
No gap fill
0 thickness top.
With 1st layer excluded my record is for 0.12mm layer heights is 25 minutes at 300mm/s peak, 4k accel, how quick can you complete it!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!