PRODOS 8 2.4.3 Boot Screen

After having posted a couple of my Apple // related HueForge items, I was asked if I could provide print files for them, so I've started uploading them to MakerWorld. This posting is for the Apple II ProDOS 2.4.3 boot screen. If you are interested in one of the other photos you see to download, you can go to my profile on MakerWorld, and look at my Published Models. If you haven't printed HueForge prints in the past, please pay attention to the print settings. You can scale the model in the X and Y direction, but do not scale the Z. Keep in mind that they will start to lose detail pretty quickly, going down. HueForge models need to be printed with a 0.4 mm nozzle at 0.08 mm layer height and 0.16 mm first layer. Use 100% rectilinear infill, and the colors are listed in the model page. These prints are currently scaled for Bambu Lab A1, P1, and X1 models with 255 mm x 255 mm build plates. Hope everyone enjoys these. Project: PRODOS 8 2.4.3 Boot Screen.hfpPrint at 100% infill with