Pull-String Nut Cracker (print in place + assembly)

This is a no support model of a moving nutcracker, also no MMU needed. Glue and some string required ! ���‍♂️ You can start with an easier Gingerbread Man or maybe a little Elf. The Nutcracker is a more complex print :) You can do a color change in order to color certain elements of its body, but this is not necessary and can be colored manually. It is of course easier if you have few colors available. You can follow the picture if you wish to do the color swaps :) The rest is printed separately and glue on, very easy placement with guidelines. Both the boots and gloves are optional.   The mouth with beard is printed separately and glued on, it has a guide at the bottom so it is easy to place. Then you can glue in the jacket, belt and the jacket bottom. For both the gloves and the boots, you can put a little bit of glue on the end of its limbs and simply push it on and let the glue dry (try dry fit beforehand) !  Best glue order  mouth with beard then top of the jacket then belt then the bottom of the jacket The little snowflake ornament can be printed separately and attached to the string to pull.