Push stick with replaceable tip

Before You BeginPlease evaluate and use this tool at your own risk. It’s meant to be a safety measure for using your table saw, but there's no guarantee it will work perfectly. Push Stick LengthsLong (20.5")Requires printing 4 models: tip, tip holder, handle, and extension.Short (13")Requires printing 3 models: tip, tip holder, and handle. Push Stick Width25 mm STL FilesTip (Flexible. TPU/TPE)Double-ended design: flip if one end is cut.Attaches to tip holder with screws. Ensure the saw blade barely clears the wood for safety to avoid hitting screws.Tip Holder and HandleMay need support for screw holes.ExtensionRequires support.HardwareLong version6 x M5 20mm button head cap screws.6 x M5 hex nuts.Short version4 x M5 20mm button head cap screws.4 x M5 hex nuts.Note: 25mm screws might also work but may stick out slightly. Socket head screws might fit, but this is untested. For hex head screws, you’ll need to modify the screw holes. Tolerances0.2-0.3 mm for screw holes and 0.4