Thingiverse
RackStack Mk8
door PjLLL
0
Downloads
0
Likes
0
Makes
Yet another off the wall item and very niche. These clip to a standard cake rack and allow multiple levels of racks to be clipped together for drying food items. I created the first version in 2020 and this eighth incarnation is the one I'm posting.
I use them for drying cured salmon in the fridge prior to cold smoking and then after the salmon is smoked they are used to store the salmon on racks in the fridge prior to packing. One day I'll make a rack to slid them into but until then...
Printed in ASA so they can be washed. Place a stacker on the corner of the rack then push a pin in through the top to clip to the rack. They hold well enough for at least 3 levels as shown in the picture. To remove, gently lift and then twist. They will pop off easily.
Mine printed OK without supports on an X1C using Polymaker ASA.
I use them for drying cured salmon in the fridge prior to cold smoking and then after the salmon is smoked they are used to store the salmon on racks in the fridge prior to packing. One day I'll make a rack to slid them into but until then...
Printed in ASA so they can be washed. Place a stacker on the corner of the rack then push a pin in through the top to clip to the rack. They hold well enough for at least 3 levels as shown in the picture. To remove, gently lift and then twist. They will pop off easily.
Mine printed OK without supports on an X1C using Polymaker ASA.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
