Radius Mark - Variable Angle

I designed this radius corner marker to be able to easily mark radius of the corner of angle between 45-150 and Radii 15-50mm (that is what has been tested!) boards.

And is the partner to the 90 radius guide here https://www.thingiverse.com/thing:6372779

I have included the Fusion 360 file which can be used to generate radii between 15 and 50mm and angles 45-150

I have included STL one STL file 20mm x 90deg This is a good starting point, if you have any problems with the model regenerating, perform undo and alter the ANGLE first then the radius

To create a new size click Modify and Change Parameters. Double click ANGLE followed by the RADIUS to set the required sizes.

You also need to change the text on the model. To do this find the "s_text" sketch (see picture) edit the sketch (right click) then double the current size, change it then "Finish Sketch"

Right click the top level node and click "Save As Mesh"

Happy printing

If you like/appreciate my design please