Raspberry Pi 4 Case

Just a simple and sturdy raspberry Pi 4 case.
Please like and comment your idea.

Pre-printing Considerations
Use the provided images for corrrect placement of the parts on the Bed.


Revision R2 (22/12/2020)
changed the fan grill position for a camera flat cable slot



Revision R1 (30/01/2020)
1.changed the fan grill for better airflow (3.3V 37C idle).
2.changed the design of the parts so the print will be easier and standard spacers will keep the parts together which makes the assembly a lot easier.
3.added a bottom part with mounting screws on wall or other surfaces.
4.added a VESA75/100 compatible version of the bottom part (23/02/2020)

Hardware Required (R1 and R1 with MountingScrew)
1. 1x 5V 40X40X10mm Axial Fan. I used 5V 0.14A normal fan but you can always use 5V 0.05A Nactua for couple of extra dollars. (https://www.amazon.co.uk/Noctua-NF-A4x10-5V-3-Pin-Premium/dp/B00NEMGCIA)
2. 4x M2.5x20mm Male-Female Threaded Hex Standoffs for screwing the Pi board t