Thingiverse
Raspberry Pi 5 case
von ScorpionK_
0
Downloads
1
Likes
0
Makes
A case for **Raspberry Pi 5** that I made for myself to use in a project with Home Assistant where I wanted to keep the Raspberry on display.
*(The print in the photo is an old revision that had the wrong hole sizes.)*
*In future, other variants may be added depending on my needs.*
For this reason, it also has provisions for inserting **two feet** to angle the case at **45 degrees**. It's **tall** to maintain compatibility with different hats and has a structure rich in **air vents**, unlike most cases I have found online.
It also has a **provision for a 30mm fan** on the side and two caps, a basic version and another with support for a **second 30mm fan (**which can also be **inserted internally** thanks to the height of the case).
*(The print in the photo is an old revision that had the wrong hole sizes.)*
*In future, other variants may be added depending on my needs.*
For this reason, it also has provisions for inserting **two feet** to angle the case at **45 degrees**. It's **tall** to maintain compatibility with different hats and has a structure rich in **air vents**, unlike most cases I have found online.
It also has a **provision for a 30mm fan** on the side and two caps, a basic version and another with support for a **second 30mm fan (**which can also be **inserted internally** thanks to the height of the case).
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!