Thingiverse
Raspberry Pi Camera Mount
5
Download
2
Likes
0
Makes
Since Thingiverse changed downloads to no longer include TXT with Thing Numbers I can't find the design(s) this was created from...
If you believe this was your original design drop me a line, and I'll absolutely give credit where it is due... As mentioned I couldn't find where I downloaded this but wanted others to benefit if possible from the design.
I wanted an adjustable Pi Camera Mount that I could tied with T-Nut from front corner of my Ender 3 too many other printer changes happening to use most other mounts I had found, and I haven't nailed down Pi Case or location yet so this fit the bill and works great.
Thing Details:
- Pi_Cam_Case: This is the main case and connection to the mount arms.
- Pi_Cam_Lid: Snaps together to hold camera into the case
- 20mm_mount_arm_90.stl: YOU ONLY NEED 1 you will use the Female (Double ear) End with single M3x16 or M3x20 to attach via T-Nut to the Extrusion.
- 20mm_mount_arm.stl: Print as needed to get height you are looking
If you believe this was your original design drop me a line, and I'll absolutely give credit where it is due... As mentioned I couldn't find where I downloaded this but wanted others to benefit if possible from the design.
I wanted an adjustable Pi Camera Mount that I could tied with T-Nut from front corner of my Ender 3 too many other printer changes happening to use most other mounts I had found, and I haven't nailed down Pi Case or location yet so this fit the bill and works great.
Thing Details:
- Pi_Cam_Case: This is the main case and connection to the mount arms.
- Pi_Cam_Lid: Snaps together to hold camera into the case
- 20mm_mount_arm_90.stl: YOU ONLY NEED 1 you will use the Female (Double ear) End with single M3x16 or M3x20 to attach via T-Nut to the Extrusion.
- 20mm_mount_arm.stl: Print as needed to get height you are looking
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
