Raspberry Pi Zero and camera mount

This is intended to mount any raspberry pi zero and v1/v2 camera to a 1/2-20 adapter

You will need:
4 x M2 brass inserts with ~3.5mm OD and screws for the camera
4 x M2.5 brass inserts with ~3.5mm OD and screws for the pi zero
1 x 3/8 to 1/4-20 adapter to heat set into the tripod mount

The small "camera adapter" may allow you to mount a magnetic lens (using a stick on metal ring) to the camera. These are sold to be used on phones.