Thingiverse
Raspberry pi Zero/Einsy bracket
par V3rtex
9
Téléchargements
5
Likes
0
Makes
!!!UPDATE!!! Near the 4 pins added to notches
This is an updated version of the rpi-zero-frame designed by Prusa research.
The original design can be found here: https://github.com/janesmae/Prusa-i3/blob/MK3/Printed-Parts/stl/rpi-zero-frame.stl
The original has design flaws, print them both and see for yourself. The most problem you will experience is when you wan't to use a reworked Einsy board enclosure. At best the door is under tension, at worst it just pops off.
Note: yes my prints are a bit stringy. I have this problem also with PLA. Just recently got 2 Prusa printers and need to gain expertise with them.
This is an updated version of the rpi-zero-frame designed by Prusa research.
The original design can be found here: https://github.com/janesmae/Prusa-i3/blob/MK3/Printed-Parts/stl/rpi-zero-frame.stl
The original has design flaws, print them both and see for yourself. The most problem you will experience is when you wan't to use a reworked Einsy board enclosure. At best the door is under tension, at worst it just pops off.
Note: yes my prints are a bit stringy. I have this problem also with PLA. Just recently got 2 Prusa printers and need to gain expertise with them.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !