Raspberry Pi Zero Flex Camera Case

This case was designed to hold a Raspberry Pi Zero W and a Raspberry Pi camera v2. This is a perfect setup to run OctoPi 3D printer software and utilize the Pi camera for time-lapses. It could also be used as a web cam unit.

The mounting system was created to accommodate custom designed mounts for any application. The mounting holes are 19.5mm on center.

**You'll need the following hardware:**
- (**4**) M3 x 10mm screws
- (**2**) M3 x 6mm screws
- [Raspberry Pi Zero W](https://www.adafruit.com/products/3400) (ideally)
- [Raspberry Pi Camera v2](https://www.amazon.com/gp/product/B01ER2SKFS/ref=as_li_tl?ie=UTF8&tag=allcitymaker-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B01ER2SKFS&linkId=b75aa178ce734a6a86bef1266330aff5) *affiliate link
or
- [Raspberry Pi NoiR Camera v2](https://www.amazon.com/gp/product/B01ER2SKFS/ref=as_li_tl?ie=UTF8&tag=allcitymaker-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B01ER2SKFS&linkId=b75aa178ce734a6a86bef1266330aff5) *affili