Rectangular Button Base Set

Rectangular Button Base Set - NEW for 2026 All rectangular button bases are intended to be a glue together two-piece design; one base ring and one insert. The pieces can be used independently and as stand alone bases, though. Sizes included are:25mm x 50mm30mm x 60mm40mm x 60mm50mm x 75mm50mm x 100mm60mm x 100mm100mm x 150mm Each base insert is true to scale, the base rings are slightly larger. NOTES: There is no need to glue the “inserts” to the base rings, it just offers more stability for movement and/or transportation. Drilling and magnetizing the inserts works just as well. All the bases can be sized up or down but may look a little odd if the sizing is not on a uniform scale. Recommended settings:.4 nozzle.10% infill.2 walls.Layer height .20mm “standard” quality. Optimal prints would require a .2 nozzle, 100% infill and .06 layer height. Is it worth the extra time and filament? In my opinion, no. But they are nice. As always, let the bed plate completely cool down before removing