Thingiverse
Rectangular Hexbit Holder
von lator
11
Downloads
32
Likes
0
Makes
50* x110 mm Box
Height 12mm with a 2 mm floor
Hexbits are 6.35 mm - there are two Versions: 6.6 mm and 7 mm sized holes. Depending on your printer, you might have to scale it.
There is a Tester-STL that you can print beforehand.
*7 mm holes => 51.5 x 110 mm Box
Height 12mm with a 2 mm floor
Hexbits are 6.35 mm - there are two Versions: 6.6 mm and 7 mm sized holes. Depending on your printer, you might have to scale it.
There is a Tester-STL that you can print beforehand.
*7 mm holes => 51.5 x 110 mm Box
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
