refractor on parallactic mount

To practice with Fusion360 I made a refractor on a parallactic setup. The refractor is about 16 cm big, the whole thing is about 25 cm high. Both suncap and eyepiece are removable.
The tripod requires three legs (...).
The rod (declination axis) must be glued to the refractor.
I used 3 and 2 mm nuts and bolts (see pictures).

Note the construction of the parallactic mount: there is a bolt inside (that also serves as an axle) connecting the two axes.

Update: you can print the mount also in one piece: use support only on the platform.
Happy printing!