Thingiverse
Remixed Commando Droid
von copy-it
3
Downloads
10
Likes
0
Makes
This model has been adjust for FDM printers
I printed this with a Bambu Lab P1S.
I modified the model of "Velrock", thanks for the original.
you have to be very careful when removing the supports. The head is to fragile and can easily be pulled off. If that happens a bit of superglue will fix them.
It is best to print with a diameter of 0.2, Bambu Lab P1S is not the best printer for printing small parts at 0.4.
The way it is sliced causes hollow parts, when you print with a diameter of 0.4
I printed this with a Bambu Lab P1S.
I modified the model of "Velrock", thanks for the original.
you have to be very careful when removing the supports. The head is to fragile and can easily be pulled off. If that happens a bit of superglue will fix them.
It is best to print with a diameter of 0.2, Bambu Lab P1S is not the best printer for printing small parts at 0.4.
The way it is sliced causes hollow parts, when you print with a diameter of 0.4
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
